Yueqing Xujing Fuse Factory
Fuse industry supplier
Many years of experience in the development of fuses
Provide you with a variety of fuse solutions
+86-13968779466
+86-13506677833
2023-08-18
The melt is blown at the crimping or other parts, and there are generally no serious burn marks. The reasons for this may be: the melt section is too ...
2023-08-18
High-voltage fuses are simple protective appliances, which are used to protect electrical equipment from overload and short-circuit currents; Accordin...
2023-08-18
Fuse in low-voltage distribution system is a kind of electrical appliance that plays a role in safety protection, fuse is widely used in power grid pr...
2023-08-18
During the normal operation of electrical equipment, the fuse should not be blown out; In the event of a short circuit, it should be fused immediately...
2023-08-18
The high-voltage drop fuse adopts single-phase operation of an insulated rod and does not allow operation with load. It has been found through practic...
2023-08-18
"Graphene, carbon nanotubes, aerogels, fullerenes, amorphous alloys, superconducting materials, metamaterials, ionic liquids, 3D printing materia...
2023-08-18
Users in the logistics industry can log in to China Industrial Electrical Appliance Network to register as members and publish logistics information. ...
2023-08-18
1. The specifications of the fuse should meet the requirements of the protected lines and equipment; The melt shall not be cut small or used together,...
2023-08-18
In order not to fuse the fuse when the motor starts, the rated current of the selected fuse is 1.5~2.5 times larger than the rated current of the moto...
2023-08-18
When removing the DC control fuse, it should be positive first, then negative. When installing the DC control fuse, it should be installed first negat...
Yueqing Xujing Fuse Factory Focus on the production of high and low voltage fuses
COPYRIGHT © 2023 Yueqing Xujing Fuse Factory ALL RIGHTS RESERVED
FriendLinks: